Say Goodbye to the Menu Button

[This post is by Scott Main, lead tech writer for developer.android.com. — Tim Bray]

Before Android 3.0 (Honeycomb), all Android-powered devices included a dedicated Menu button. As a developer, you could use the Menu button to display whatever options were relevant to the user, often using the activity�s built-in options menu. Honeycomb removed the reliance on physical buttons, and introduced the ActionBar class as the standard solution to make actions from the user options immediately visible and quick to invoke. In order to provide the most intuitive and consistent user experience in your apps, you should migrate your designs away from using the Menu button and toward using the action bar. This isn�t a new concept � the action bar pattern has been around on Android even before Honeycomb. As Ice Cream Sandwich rolls out to more devices, it�s important that you begin to migrate your designs to the action bar in order to promote a consistent Android user experience.

You might worry that it�s too much work to begin using the action bar, because you need to support versions of Android older than Honeycomb. However, it�s quite simple for most apps because you can continue to support the Menu button on pre-Honeycomb devices, but also provide the action bar on newer devices with only a few lines of code changes.

If I had to put this whole post into one sentence, it�d be: Set targetSdkVersion to 14 and, if you use the options menu, surface a few actions in the action bar with showAsAction="ifRoom".

Don�t call it a menu

Not only should your apps stop relying on the hardware Menu button, but you should stop thinking about your activities using a �menu button� at all. Your activities should provide buttons for important user actions directly in the action bar (or elsewhere on screen). Those that can�t fit in the action bar end up in the action overflow.

In the screenshot here, you can see an action button for Search and the action overflow on the right side of the action bar.

Even if your app is built to support versions of Android older than 3.0 (in which apps traditionally use the options menu panel to display user options/actions), when it runs on Android 3.0 and beyond, there�s no Menu button. The button that appears in the system/navigation bar represents the action overflow for legacy apps, which reveals actions and user options that have �overflowed off the screen.�

This might seem like splitting hairs over terminology, but the name action overflow promotes a different way of thinking. Instead of thinking about a menu that serves as a catch-all for various user options, you should think more about which user options you want to display on the screen as actions. Those that don't need to be on the screen can overflow off the screen. Users can reveal the overflow and other options by touching an overflow button that appears alongside the on-screen action buttons.

Action overflow button for legacy apps

If you�ve already developed an app to support Android 2.3 and lower, then you might have noticed that when it runs on a device without a hardware Menu button (such as a Honeycomb tablet or Galaxy Nexus), the system adds the action overflow button beside the system navigation.

This is a compatibility behavior for legacy apps designed to ensure that apps built to expect a Menu button remain functional. However, this button doesn�t provide an ideal user experience. In fact, in apps that don�t use an options menu anyway, this action overflow button does nothing and creates user confusion. So you should update your legacy apps to remove the action overflow from the navigation bar when running on Android 3.0+ and begin using the action bar if necessary. You can do so all while remaining backward compatible with the devices your apps currently support.

If your app runs on a device without a dedicated Menu button, the system decides whether to add the action overflow to the navigation bar based on which API levels you declare to support in the <uses-sdk> manifest element. The logic boils down to:

• If you set either minSdkVersion or targetSdkVersion to 11 or higher, the system will not add the legacy overflow button.




• Otherwise, the system will add the legacy overflow button when running on Android 3.0 or higher.




• The only exception is that if you set minSdkVersion to 10 or lower, set targetSdkVersion to 11, 12, or 13, and you do not use ActionBar, the system will add the legacy overflow button when running your app on a handset with Android 4.0 or higher.

That exception might be a bit confusing, but it�s based on the belief that if you designed your app to support pre-Honeycomb handsets and Honeycomb tablets, it probably expects handset devices to include a Menu button (but it supports tablets that don�t have one).

So, to ensure that the overflow action button never appears beside the system navigation, you should set the targetSdkVersion to 14. (You can leave minSdkVersion at something much lower to continue supporting older devices.)

Migrating to the action bar

If you have activities that use the options menu (they implement onCreateOptionsMenu()), then once the legacy overflow button disappears from the system/navigation bar (because you�ve set targetSdkVersion to 14), you need to provide an alternative means for the user to access the activity�s actions and other options. Fortunately, the system provides such a means by default: the action bar.

Add showAsAction="ifRoom" to the <item> elements representing the activity�s most important actions to show them in the action bar when space is available. For help deciding how to prioritize which actions should appear in the action bar, see Android Design�s Action Bar guide.

To further provide a consistent user experience in the action bar, we suggest that you use action icons designed by the Android UX Team where appropriate. The available icons support common user actions such as Refresh, Delete, Attach, Star, Share and more, and are designed for the light and dark Holo themes; they�re available on the Android Design downloads page.

If these icons don�t accommodate your needs and you need to create your own, you should follow the Iconography design guide.

Removing the action bar

If you don�t need the action bar, you can remove it from your entire app or from individual activities. This is appropriate for apps that never used the options menu or for apps in which the action bar doesn�t meet design needs (such as games). You can remove the action bar using a theme such as Theme.Holo.NoActionBar or Theme.DeviceDefault.NoActionBar.

In order to use such a theme and remain backward compatible, you can use Android�s resource system to define different themes for different platform versions, as described by Adam Powell�s post, Holo Everywhere. All you need is your own theme, which you define to inherit different platform themes depending on the current platform version.

For example, here�s how you can declare a custom theme for your application:

<application android:theme="@style/NoActionBar">

Or you can instead declare the theme for individual <activity> elements.

For pre-Honeycomb devices, include the following theme in res/values/themes.xml that inherits the standard platform theme:

<resources>
    <style name="NoActionBar" parent="@android:style/Theme">
        <!-- Inherits the default theme for pre-HC (no action bar) -->
    </style>
</resources>

For Honeycomb and beyond, include the following theme in res/values-v11/themes.xml that inherits a NoActionBar theme:

<resources>
    <style name="NoActionBar" parent="@android:style/Theme.Holo.NoActionBar">
        <!-- Inherits the Holo theme with no action bar; no other styles needed. -->
    </style>
</resources>

At runtime, the system applies the appropriate version of the NoActionBar theme based on the system�s API version.

Summary

• Android no longer requires a dedicated Menu button, some devices don�t have one, and you should migrate away from using it.




• Set targetSdkVersion to 14, then test your app on Android 4.0.




• Add showAsAction="ifRoom" to menu items you�d like to surface in the action bar.







• If the ActionBar doesn�t work for your app, you can remove it with Theme.Holo.NoActionBar or Theme.DeviceDefault.NoActionBar.

For information about how you should design your action bar, see Android Design�s Action Bar guide. More information about implementing the action bar is also available in the Action Bar developer guide.

Southern-hemisphere Developer Labs

We�ve just scheduled Android Developer Labs for Melbourne (January 31), Sydney (February 3), and Auckland (February 8). The material is not introductory; it�s aimed at people with existing apps who want to make them better in the era of Ice Cream Sandwich and tablets. You�ll want to show up with the SDK installed, and a couple of devices.

If this describes you, drop by the ADL page and sign up. You should hurry, because these are not large-scale events and there are more qualified people than there are seats.

Introducing the Android Design site

[This post is by Christian Robertson, who leads the Android visual design group. He is also the designer of the Roboto font family. �Tim Bray]

Ice Cream Sandwich (Android 4.0) is our biggest redesign yet � both for users and developers. We�ve enhanced the UI framework with new interactions and styles that will let you create Android apps that are simpler and more beautiful than ever before.

To help you use great UI in your apps, we�re introducing Android Design: the place to learn about principles, building blocks, and patterns for creating world-class Android user interfaces. Whether you�re a UI professional or a developer playing that role, these docs show you how to make good design decisions, big and small.

The Android User Experience Team is committed to helping you design amazing apps that people love, and this is just the beginning. In the coming months, we�ll expand Android Design with more in-depth content. And watch this blog for a series of posts about design, and invitations to Google+ hangouts on the topics you care about most.

So head on over to Android Design, and make something amazing!

Levels in Renderscript

[This post is by R. Jason Sams, an Android Framework engineer who specializes in graphics, performance tuning, and software architecture. �Tim Bray]

For ICS, Renderscript (RS) has been updated with several new features to simplify adding compute acceleration to your application. RS is interesting for compute acceleration when you have large buffers of data on which you need to do significant processing. In this example we will look at applying a levels/saturation operation on a bitmap.

In this case, saturation is implemented by multiplying every pixel by a color matrix Levels are typically implemented with several operations.

1. Input levels are adjusted.

2. Gamma correction.

3. Output levels are adjusted.

4. Clamp to the valid range.

A simple implementation of this might look like:

for (int i=0; i < mInPixels.length; i++) {
    float r = (float)(mInPixels[i] & 0xff);
    float g = (float)((mInPixels[i] >> 8) & 0xff);
    float b = (float)((mInPixels[i] >> 16) & 0xff);

    float tr = r * m[0] + g * m[3] + b * m[6];
    float tg = r * m[1] + g * m[4] + b * m[7];
    float tb = r * m[2] + g * m[5] + b * m[8];
    r = tr;
    g = tg;
    b = tb;

    if (r < 0.f) r = 0.f;
    if (r > 255.f) r = 255.f;
    if (g < 0.f) g = 0.f;
    if (g > 255.f) g = 255.f;
    if (b < 0.f) b = 0.f;
    if (b > 255.f) b = 255.f;

    r = (r - mInBlack) * mOverInWMinInB;
    g = (g - mInBlack) * mOverInWMinInB;
    b = (b - mInBlack) * mOverInWMinInB;

    if (mGamma != 1.0f) {
        r = (float)java.lang.Math.pow(r, mGamma);
        g = (float)java.lang.Math.pow(g, mGamma);
        b = (float)java.lang.Math.pow(b, mGamma);
    }

    r = (r * mOutWMinOutB) + mOutBlack;
    g = (g * mOutWMinOutB) + mOutBlack;
    b = (b * mOutWMinOutB) + mOutBlack;

    if (r < 0.f) r = 0.f;
    if (r > 255.f) r = 255.f;
    if (g < 0.f) g = 0.f;
    if (g > 255.f) g = 255.f;
    if (b < 0.f) b = 0.f;
    if (b > 255.f) b = 255.f;

    mOutPixels[i] = ((int)r) + (((int)g) << 8) + (((int)b) << 16)
                    + (mInPixels[i] & 0xff000000);
}

This code assumes a bitmap has been loaded and transferred to an integer array for processing. Assuming the bitmaps are already loaded, this is simple.

        mInPixels = new int[mBitmapIn.getHeight() * mBitmapIn.getWidth()];
        mOutPixels = new int[mBitmapOut.getHeight() * mBitmapOut.getWidth()];
        mBitmapIn.getPixels(mInPixels, 0, mBitmapIn.getWidth(), 0, 0,
                            mBitmapIn.getWidth(), mBitmapIn.getHeight());

Once the data is processed with the loop, putting it back into the bitmap to draw is simple.

        mBitmapOut.setPixels(mOutPixels, 0, mBitmapOut.getWidth(), 0, 0,
                             mBitmapOut.getWidth(), mBitmapOut.getHeight());

The full code of the application is around 232 lines when you include code to compute the constants for the filter kernel, manage the controls, and display the image. On the devices I have laying around this takes about 140-180ms to process an 800x423 image.

What if that is not fast enough?

Porting the kernel of this image processing to RS (available at android-renderscript-samples) is quite simple. The pixel processing kernel above, reimplemented for RS looks like:

void root(const uchar4 *in, uchar4 *out, uint32_t x, uint32_t y) {
    float3 pixel = convert_float4(in[0]).rgb;
    pixel = rsMatrixMultiply(&colorMat, pixel);
    pixel = clamp(pixel, 0.f, 255.f);
    pixel = (pixel - inBlack) * overInWMinInB;
    if (gamma != 1.0f)
        pixel = pow(pixel, (float3)gamma);
    pixel = pixel * outWMinOutB + outBlack;
    pixel = clamp(pixel, 0.f, 255.f);
    out->xyz = convert_uchar3(pixel);
}

It takes far fewer lines of code because of the built-in support for vectors of floats, matrix operations, and format conversions. Also note that there is no loop present.

The setup code is slightly more complex because you also need to load the script.

        mRS = RenderScript.create(this);
        mInPixelsAllocation = Allocation.createFromBitmap(mRS, mBitmapIn,
                                                          Allocation.MipmapControl.MIPMAP_NONE,
                                                          Allocation.USAGE_SCRIPT);
        mOutPixelsAllocation = Allocation.createFromBitmap(mRS, mBitmapOut,
                                                           Allocation.MipmapControl.MIPMAP_NONE,
                                                           Allocation.USAGE_SCRIPT);
        mScript = new ScriptC_levels(mRS, getResources(), R.raw.levels);

This code creates the RS context. It then uses this context to create two memory allocations to hold the RS copy of the bitmap data. Last, it loads the script to process the data.

Also in the source there are a few small blocks of code to copy the computed constants to the script when they change. Because we reflect the globals from the script this is easy.

        mScript.set_inBlack(mInBlack);
        mScript.set_outBlack(mOutBlack);
        mScript.set_inWMinInB(mInWMinInB);
        mScript.set_outWMinOutB(mOutWMinOutB);
        mScript.set_overInWMinInB(mOverInWMinInB);

Earlier we noted that there was no loop to process all the pixels. The RS code that processes the bitmap data and copies the result back looks like this:

        mScript.forEach_root(mInPixelsAllocation, mOutPixelsAllocation);
        mOutPixelsAllocation.copyTo(mBitmapOut);

The first line takes the script and processes the input allocation and places the result in the output allocation. It does this by calling the natively compiled version of the script above once for each pixel in the allocation. However, unlike the dalvik implementation, the primitives will automatically launch extra threads to do the work. This, combined with the performance of native code can produce large performance gains. I�ll show the results with and without the gamma function working because it adds a lot of cost.

800x423 image

Device	Dalvik	RS	Gain
Xoom	174ms	39ms	4.5x
Galaxy Nexus	139ms	30ms	4.6x
Tegra 30 device	136ms	19ms	7.2x

800x423 image with gamma correction

Device	Dalvik	RS	Gain
Xoom	994ms	259ms	3.8x
Galaxy Nexus	787ms	213ms	3.7x
Tegra 30 device	783ms	104ms	7.5x

These large gains represent a large return on the simple coding investment shown above.

Holo Everywhere

[This post is by Adam Powell, an Android Framework engineer who cares about style. �Tim Bray]

Android 4.0 showcases the Holo theme family, further refined since its debut in Android 3.0. But as most developers know, a new system theme for some Android devices isn�t a new or uncommon event. For developers new system themes mean more design targets for their apps. Using system themes means developers can take advantage of a user�s existing expectations and it can save a lot of production time, but only if an app designer can reliably predict the results. Before Android 4.0 the variance in system themes from device to device could make it difficult to design an app with a single predictable look and feel. We set out to improve this situation for the developer community in Ice Cream Sandwich and beyond.

Theme.Holo

If you�re not already familiar with Android�s style and theme system, you should read Styles and Themes before continuing.

Compatibility Standard

In Android 4.0, Holo is different. We�ve made the inclusion of the unmodified Holo theme family a compatibility requirement for devices running Android 4.0 and forward. If the device has Android Market it will have the Holo themes as they were originally designed.

This standardization goes for all of the public Holo widget styles as well. The Widget.Holo styles will be stable from device to device, safe for use as parent styles for incremental customizations within your app.

The Holo theme family in Android 4.0 consists of the themes Theme.Holo, Theme.Holo.Light, and Theme.Holo.Light.DarkActionBar. Examples of these themes in action are shown in the screenshots lining this post.

To use a Holo theme, explicitly request one from your manifest on your activity or application element, e.g. android:theme="@android:style/Theme.Holo". Your app will be displayed using the unmodified theme on all compatible Android 4.0 devices. The Holo themes may also be used as stable parent themes for app-level theme customizations.

What about device themes?

We have no desire to restrict manufacturers from building their own themed experience across their devices. In fact we�ve gone further to make this even easier. In Android 4.0�s API (level 14) we�ve added a new public theme family to complement the Holo family introduced in Android 3.0: DeviceDefault. DeviceDefault themes are aliases for the device�s native look and feel. The DeviceDefault theme family and widget style family offer ways for developers to target the device�s native theme with all customizations intact.

Theme.Holo.Light

Formally separating these theme families will also make future merges easier for manufacturers updating to a new platform version, helping more devices update more quickly. Google�s Nexus devices alias DeviceDefault to the unmodified Holo themes.

Making use of your chosen theme

We�ve added a number of theme attributes to report common metrics and color palette info to apps that want to fit in with a theme. These include highlight colors, default padding and margins for common UI elements such as list items, and more. Apps that wish to integrate with their chosen theme (both Holo and DeviceDefault included) can refer to these theme attributes as in the examples below:

Sample button with system-supplied touch highlight:

<ImageButton android:id="@+id/my_button"
    android:layout_width="wrap_content"
    android:layout_height="wrap_content"
    android:src="@drawable/button_icon"
    android:background="?android:attr/selectableItemBackground" />

Sample widget with a custom pressedHighlightColor attribute, value retrieved from the system theme:

<MyWidget android:layout_width="wrap_content"
    android:layout_height="wrap_content"
    myapp:pressedHighlightColor="?android:attr/colorPressedHighlight" />

Sample list item layout using system-supplied metrics and text appearance:

<LinearLayout android:layout_width="match_parent"
    android:layout_height="?android:attr/listPreferredItemHeight"
    android:paddingLeft="?android:attr/listPreferredItemPaddingLeft"
    android:paddingRight="?android:attr/listPreferredItemPaddingRight">
    <TextView android:id="@+id/text"
        android:textAppearance="?android:attr/textAppearanceListItem" />
    <!-- Other views here -->
</LinearLayout>

Theme.Holo.Light.DarkActionBar

(Available in API level 14 and above)

Defaults for Older Apps

If an app does not explicitly request a theme in its manifest, Android 4.0 will determine the default theme based on the app�s targetSdkVersion to maintain the app�s original expectations: For values less than 11, @android:style/Theme; between 11 and 13 @android:style/Theme.Holo; and for 14 and higher @android:style/Theme.DeviceDefault.

Using Holo while supporting Android 2.x

Most Android developers will still want to support 2.x devices for a while as updates and new devices continue to roll out. This doesn�t stop you from taking advantage of newer themes on devices that support them though. Using Android�s resource system you can define themes for your app that are selected automatically based on the platform version of the device it�s running on.

Theme.Holo and Theme.Holo.Light have been available since API level 11, but Theme.Holo.Light.DarkActionBar is new in API level 14.

res/values/themes.xml:

<resources>
    <style name="MyTheme" parent="@android:style/Theme">
        <!-- Any customizations for your app running on pre-3.0 devices here -->
    </style>
</resources>

res/values-v11/themes.xml:

<resources>
    <style name="MyTheme" parent="@android:style/Theme.Holo">
        <!-- Any customizations for your app running on devices with Theme.Holo here -->
    </style>
</resources>

Finally, in AndroidManifest.xml:

<!-- [...] -->
    <application android:name="MyApplication"
            android:label="@string/application_label"
            android:icon="@drawable/app_icon"
            android:hardwareAccelerated="true"
            android:theme="@style/MyTheme">
<!-- [...] -->

You can go as far with this idea as you like, up to and including defining your own theme attributes with different values across configurations for use in your other resources. To learn more about Android�s resource system, see Application Resources.

Final Thoughts

Android apps running on 4.0 and forward can use the Holo themes and be assured that their look and feel will not change when running on a device with a custom skin. Apps that wish to use the device�s default styling can do so using the DeviceDefault themes that are now in the public API. These changes let you spend more time on your design and less time worrying about what will be different from one device to another. Finally, Android�s resource system allows you to support features from the latest platform version while offering graceful fallback on older devices.